Home / Products / Medical Endoscope Camera Module / 2K Medical Endoscope Camera Module

2K Medical Endoscope Camera Module

2K Medical Endoscope Camera Modules for Medical Device OEMs

2K/1080P imaging with customizable optics, mechanics, cables, connectors and image-processing parameters for endoscope OEM applications.

Designed for integration into laparoscopes, cystoscopes, bronchoscopes, arthroscopes and other medical imaging systems, the modules can be customized according to optical, mechanical, electrical and image-processing requirements.

Parameters

Synchronization method	Line-by-line scanning
Horizontal resolution	Number: 1080 (60P), 720 (120P) Maximum: 1100TVL (1080P)
S/N	Greater than 50dB (AGC off)
Positioning aperture	21MM
Video output signal	Digital: 3G-SDI, Analog: NTSC/PAL CVBS
On-screen display (OSD)	Available
Lens	Manual
Shutter speed	Automatic/Manual (1/60~1/60,000 (NTSC), 1/50~50,000 (PAL))
Gain control	Level 0~10
Digital slow shutter	Off/On (X2/X4/X8/X16/X32/X64)
Brightness	Level 0~20
WDR/ BLC	Off/BLC/HLC/WDR
Color density	Off/On
Contrast	Auto / Color / B&W / EXT
White balance	Automatic/Automatic EXT/Pushing/Manual
Gamma	Off/Low/Medium/High
Mirror/Flip	Off/On
Sharpness	X
B/R-Gain	Level 0~10
Digital amplification	Off/On
RS-485	Level 0~96
Language	District 24
Reset	English/Chinese/Korean/Japanese
Power	DC12V, maximum 2.5W
Size	P26*2.0mm(43mmT)

Medical Endoscope Integration Options

Optical Configuration

Custom optical development can cover:
Lens and sensor selection
Field of view adjustment
Working distance
Focus range
Image distortion control
Image sharpness and edge performance

Mechanical Integration

The camera housing and distal-tip structure can be adapted to the endoscope design, including:
Camera module outer diameter
Module length
Distal-tip structure
Stainless steel or selected biocompatible housing materials

Application Areas

Laparoscopy and General Surgery
Compact camera configurations for visualization in minimally invasive surgical systems.

Urology and Cystoscopy
Camera modules designed for integration into rigid and flexible urological endoscopes, subject to the required diameter and optical configuration.

Gastroenterology

Image configurations developed for upper and lower gastrointestinal endoscopy, with attention to color reproduction and image clarity.

ENT and Bronchoscopy

Small-form-factor camera configurations for airway imaging applications, including adult and pediatric systems where the required mechanical dimensions can be met.

Arthroscopy and Orthopedics

Camera configurations for arthroscopic imaging, with mechanical and sealing requirements selected according to the target system.

OEM/ODM Capabilities

Area	Customization Options
Optics	Sensor, lens, FOV, working distance, focus
Mechanical	Camera OD, length, housing, mounting structure
Cable & Connector	Cable length, routing, connector, pin configuration
Video Interface	3G-SDI, CVBS and selected digital interfaces
Image & Firmware	White balance, color, exposure, noise reduction, WDR
Prototype Support	Evaluation kits, samples and custom prototypes
Engineering Support	Optical, mechanical, hardware and firmware support

OEM Development Process

Requirement Review

Camera diameter, resolution, frame rate, optical requirements, cable, connector, output interface and sterilization requirements are confirmed.

Technical Proposal

The engineering team evaluates the available sensor, lens, mechanical structure and electronics configuration.

Evaluation Sample

An evaluation kit or sample module is provided for initial image and integration testing.

Prototype Development

Optical, mechanical, cable and firmware parameters are adjusted according to test results.

Verification

The customized configuration is evaluated against the agreed optical, electrical, mechanical and environmental requirements.

Production

After prototype approval, the finalized configuration moves to production with defined inspection and quality-control procedures.

Quality Control & Performance Testing

MTF & Resolution Testing

MTF and resolution testing evaluate image sharpness across the image field.

Color & Image Testing

Color charts and standardized test targets evaluate color reproduction, brightness and dynamic range.

Thermal & Reliability Testing

Temperature cycling and continuous operation testing evaluate performance under defined conditions.

Compatibility & Integration Support

Evaluation Kits

Evaluation kits are available for initial image testing and system development. Selected kits can include USB 3.0 or USB Type-C output boards for connection to a PC.

Image Processing Platforms

Integration can be evaluated with commonly used embedded processing platforms, including NVIDIA Jetson, Rockchip, Xilinx FPGA and NXP-based systems, depending on the selected interface and software architecture.

Engineering Support

During development, OEM customers can communicate directly with our optical, hardware and firmware engineers to review camera specifications, integration requirements and prototype feedback.

Frequently Asked Questions

Q: Can you provide evaluation kits for initial image testing?

A: Yes. Selected configurations can be supplied with evaluation kits using USB 3.0 or USB Type-C output boards, allowing engineering teams to connect the camera to a PC for initial image evaluation and software testing.

Q: Can the camera module outer diameter be customized?

A: Yes. The camera housing and distal-tip configuration can be customized according to the selected sensor, lens, cable and mechanical structure. Available dimensions depend on the optical and electronic configuration.

Q: Can you provide autoclavable camera modules?

A: Yes. We offer configurations developed for reusable endoscope applications requiring autoclave sterilization. The applicable materials, sealing structure and optical components are selected according to the required sterilization conditions and validation requirements.

Q: Can the camera module be customized for different endoscope applications?

A: Yes. Optical, mechanical, electrical and image-processing parameters can be adapted according to the target endoscope. Customization may include lens, FOV, working distance, housing dimensions, cable, connector, video interface and ISP parameters.

Q: Do you support CE MDR or FDA 510(k) documentation?

A: We support OEM qualification and regulatory work by providing applicable component documentation, such as material compliance information, ISO 13485 certification, production information and relevant test or material documentation. Final regulatory submission and approval remain the responsibility of the finished medical device manufacturer.

Q: What is the lead time for OEM prototypes?

A: Standard evaluation samples can typically be shipped within 3–5 working days. Custom optical or mechanical prototypes generally require approximately 3–6 weeks, depending on the design requirements, tooling and project scope.

Q: Can you support low-volume OEM development before mass production?

A: OEM projects can begin with evaluation samples and prototype development before production quantities are finalized. Project-specific MOQ, prototype cost and production lead time should be confirmed according to the required configuration.

Q: What information is needed to start an OEM project?

A: We typically need the target application, camera diameter, resolution, frame rate, field of view, working distance, cable length, video interface, connector requirements and sterilization method. Drawings or existing camera samples can also be provided for engineering evaluation.

With abundant experience, we are one of the leading manufacturers and suppliers of 2k medical endoscope camera module in China. Please feel free to buy advanced 2k medical endoscope camera module in stock here from our factory. We also accept customized orders.